153 Easy installation/removal of cars • Gate tracks for 26, 32, 40 mm cars feature easy-to-remove fasteners to load/unload cars. • 18 mm switch track uses screwpin stops and stop at masthead for easy car removal. Optional Trysail Switch system reduces weight aloft • Integrates trysail with mainsail switch systems; shares track. • Cars switch automatically—only trysail cars travel onto the trysail track; mainsail cars pass through to switch and storage tracks. • All track is hardcoat-anodized. • Available in 26, 32, and 40 mm sizes. Variety of mounting options • 18 and 26 mm slug-mount track converts masts with sail grooves for mast-up installation. Boats under 12.2 m (40') use standard slug-mount track. Boats from 12.2 - 13.7 m (40' - 45') require 18 mm high-load slug-mount track at full hoist and all reef point headboard locations. 18 mm systems available for round, flat, or wide flat mast grooves. Boats from 13.7 - 24.4 m (45' - 80') use 26 mm slug-mount track. 26 mm available with flat mast groove slugs. • 18, 26, 32 mm drill/tap track and switches fit masts without sail grooves; join track sections with splice links. • 26, 32, and 40 mm flange track is available in bond and bolt-down versions. Bond track is joined to the mast with a structural adhesive to reduce weight aloft; eliminates the majority of track fasteners for lighter-weight system. Consult mast builder for bond track installation recommendations. Low-friction components • Cars run on low-friction plastic slides. • Switch plate with no moving parts minimizes friction. 26, 32 & 40 mm flange track 18 mm system 26, 32, 40 mm system 18 & 26 mm slug-mount track 18, 26, 32 mm drill-and-tap track Switch T-Track Battcar Systems
View this content as a flipbook by clicking here.