75 ‡Max line Ø: 10 mm (3/8"). ‡‡Indicate color: BL (blue), Y (yellow), G (green), B (black), R (red). Cam Cleat Accessories Use these accessories to adapt our cleats for many applications, such as cleaning up cockpit controls with color-coding or leading a line cleanly to a cleat. The 475 Micro Cam-Matic cleat and 298 wire fairleads guide line into the entrance side of the cleat, maintaining a low profile and holding line close to the cleat. Use the 475 with the 468 and 471 Micro Cam-Matic cleats. Use the 298 wire fairlead with the 150 Cam-Matic and 365 Carbo-Cam cleats. The 494 and 495 Fast Release Fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Use for fast spinnaker take- downs during mark roundings—anywhere fast release is crucial. Harken Cam-Matic Fairleads are made of tough, abrasion-resistant composite. Use the 495 with 468 and 471 Micro Cam-Matic cleats; the 494 fairlead with the 150 Cam-Matic and 365 Carbo-Cam cleats. The 375 X-Treme Angle Fairlead uses low-friction stainless steel line guides on the exit side of the cleat. This allows crew to release and recleat at angles up to 90 degrees to the cleat without centering the line. Perfect for cabintop controls and adjusting deck cleats from the rail. A must for fine-tuning Laser outhaul and cun- ningham controls. Harken Cam-Matic Fairleads are made of tough, abrasion-resistant composite. Use the 476 X-Treme Angle Fairlead with the 468 and 471 Micro Cam-Matic cleats; the 375 X-Treme Angle Fairlead with the 150 Cam-Matic and 365 Carbo-Cam cleats. The 424 and 425 low-profile, top-mounted Flairleads can also be used to guide lines. They feature stainless wearguards and are available in various colors for color coding cams. Use the 424 with the 468 and 471 Micro Cam-Matic cleats. Use the 425 with the 150 Cam-Matic and 365 Carbo-Cam cleats. Wedge kits and risers improve the angle of your cams. A range of eyestraps holds line at the cleat and provides fair leads. Cleat and uncleat at angles up to 90 degrees. Stainless steel loop provides low-friction turning post. Base plate ensures optimal cleating height. Ideal for Laser outhaul/ cunningham controls. Part No. Description Height above cam Height Length Width Weight Fastener spacing Fits in mm in mm in mm in mm oz g in mm Micro 281.PAIR Eyestrap (pair) 1/2 12 1 7/16 36 7/16 11 .16 4.5 1 1/16 27 468/471 475 Wire fairlead 15/16 23 1 7/8 48 15/16 24 .29 8 1 1/16 27 468/471 293 Flat cam riser 5/8 16 1 7/8 48 15/16 24 .5 14 1 1/16 27 468/471 294 15° angled micro cam riser 3/4 19 1 7/8 48 15/16 24 .75 21 1 1/16 27 468/471 297 Cam wedge kit 1 7/8 48 15/16 24 .16 5 1 1/16 27 468/471 476 X-Treme Angle Fairlead 7/8 22 1 7/16 37 1 5/16 33 2 51 1 29 1 1/16 27 468/471 424 Flairlead‡‡ 7/16 11 1 5/8 41 5/8 16 .13 3.5 1 1/16 27 468/471 495 Fast Release Fairlead 9/16 14 1 9/16 40 1 5/16 33 1 15/16 49 .92 26 1 1/16 27 468/471 Standard 145 Cam wedge kit 2 9/16 65 1 1/4 32 1 28 1 1/2 38 150/365 201.PAIR Low-profile eyestrap (pair) 3/8 10 1 7/8 48 7/16 11 .16 4.5 1 1/2 38 150/365 295 Flat cam riser 1 24 2 9/16 65 1 1/4 32 1.5 38 1 1/2 38 150/365 296 15° angled cam riser 1 1/16 27 2 9/16 65 1 1/4 32 1.25 35 1 1/2 38 150/365 298 Wire fairlead 1 1/4 32 2 9/16 65 1 1/4 32 .5 14 1 1/2 38 150/365 375 X-Treme Angle Fairlead‡ 15/16 24 2 1/4 57 1 13/16 46 2 9/16 65 1.92 56 1 1/2 38 150/365 425 Flairlead‡‡ 5/8 16 2 3/16 56 1 3/16 21 .25 7 1 1/2 38 150/365 438 Cam adapter plate 9/16 14 3 76 1 7/16 36 2.5 71 1 1/2 38 150/365 494 Fast Release Fairlead 3/4 19 2 3/32 53 1 13/16 47 2 5/8 67 2.12 60 1 1/2 38 150/365 Offshore 282.PAIR Large eyestrap (pair) 15/16 23 2 13/16 71 3/4 19 .8 23 2 1/16 52 280 283 Offshore cam wedge kit 3 3/8 85 1 1/2 38 1.5 43 2 1/16 52 280 137.PAIR Eyestrap (pair) 3/4 19 2 51 9/16 14 .32 9 1 1/2 38 150/365
View this content as a flipbook by clicking here.